Rigips ProMix ready-to-use filler in a recycled plastic bucket
Filler sustainability class! As of: 04/25
Environmental responsibility begins with the responsible use of resources.
RIGIPS once again proves itself to be a pioneer in sustainable action.
The switch to buckets made of recycled material has been implemented step by step for the entire Rigips ProMix ready-mixed joint compound programme.
Top Rigips quality meets exemplary environmental awareness.
So, apply joint compound today for a more sustainable tomorrow!
Find the right joint compound by colour code
Blue lid:
for joint & finish, highest quality
Green lid:
pure finishing material, high quality, bright white
Black lid:
Filler for concealed layers!
Rigips® ProMix Plus
The ready-to-use joint compound for joints and finishing
Rigips ProMix Plus is a ready-to-use joint compound for filling joints in Rigips gypsum boards when used with Rigips paper reinforcement tape. It can also be used for finishing joints and surfaces on gypsum boards, concrete, rough plaster and other substrates.
Benefits
- Ready-to-use joint compound according to DIN EN 13963/Type 3A
- Quality levels from Q 1 to Q 4
- Very smooth application
- Excellent adhesion
- Optimally sandable
- Low shrinkage
- Suitable for all Rigips fire protection constructions made of gypsum boards
Material consumption
- VARIO joint = approx. 350 g/m2
- Surface = approx. 1.36 kg/m2 per mm layer thickness
Packaging sizes: 18 kg and 5 kg
Rigips® ProMix Finish
The ready-mixed fine joint compound
The ProMix finish from RIGIPS is a ready-to-use fine joint compound for joint and surface finishing on gypsum board surfaces, concrete, rough plaster surfaces and other substrates.
Benefits
- Ready-to-use joint compound according to DIN EN 13963/Type 2A
- Perfect joint finish from Q 2 to Q 4
- Clean and absolutely perfect transition down to “zero”
- High degree of whiteness, ideal for surface design
- Smooth consistency for noticeably easy application
- Very good smoothing and adhesion properties
- Perfect edge areas – without rolling or burning
- Very easy to sand
Material consumption
- Joint finish = approx. 30 g/m2
- Surface = approx. 1.75 kg/m2 per mm layer thickness
Packaging size: 18 kg
Rigips® ProMix Filler
The ready-to-use joint compound for the first layer of boards
Use Rigips ProMix filler to fill the joints of the lower layers of cladding in multi-layer constructions. Only suitable for manual application.
Benefits
- Ready-to-use joint compound according to DIN EN 13963/Type 1A
- Smooth application
- Optimised shrinkage behaviour
- Short drying times
Material consumption
- Joint = 350 g/m2
Packaging size: 18 kg
Buckets made from recycled PIR (“Postindustrial Recyclate”), which is obtained from production-related plastic waste such as surplus, rejects or residual material.